Log In

Snowmobiles for Sale in bemidji, Minnesota

Sort By
Premium
Nearest
Recent
High $
Low $
Newest
Oldest
Loading your results...
Features ROTAX 850 E-TEC ENGINE: The most powerful 2-stroke engine in the industry.* It pumps out 10 more horsepower (165 hp) than its predecessor, but its responsiveness is what really shines. With the new pDrive primary clutch, it’s 30% quicker responding than the 800R E-TEC giving you the instant control you demand. *Observed HP measured on internal dyno test in optimal conditions for 2-stroke engines. REV GEN4 PLATFORM: Key to the Summit’s agility is the extreme mass centralization of the 4th generation REV platform. The 850 E-TEC engine is compact and centered between the skis, making the vehicle easy to roll. The trademark pyramidal frame, new die-cast aluminum front suspension module and new heat exchanger design ensure it’s strong, yet lightweight. PDRIVE CLUTCH: A major factor in the quickness of REV sleds is the new pDrive clutch. Fast and friction-free dual rollers transfer torque in place of traditional sliding buttons on this 100% new clutch. The oversize rollers with needle bearings, wide flyweights and shaft-on-shaft design emphasize smooth operation and long life. Ultra-responsive shifting, impressive RPM consistency and 2.8 lb./ 1.3 kg lighter than the TRA VII. TMOTION REAR SUSPENSION: The tMotion flexes laterally, reducing the effort to initiate a roll, due to a ball joint at the center hinge between the rear arm and drop link and split flat-tube front arms. Very progressive motion ratio makes the ride on trails even more comfortable. POWDERMAX LIGHT TRACK WITH FLEXEDGE: New 3.5 in. (9 cm) pitch reduces weight, and keeps snow between lugs for added performance. Exclusive 16-in (41-cm) wide design adds flotation and traction without sacrificing manoeuvrability. Edges flex to reduce the effort to initiate roll-up. Available in either 2.5 or 3.0 in (6.3 or 7.63 cm) lug heights.

$14,049

Bemidji Sports Centre
Bemidji, MN
Features ROTAX 600R E-TEC ENGINE: Following its big brother Rotax 850 E-TEC engine's lead with second generation E-TEC technology, the Rotax 600R E-TEC engine offers a 30% improvement in throttle response**, crisp acceleration and sets a new 600cc class standard with 125 horsepower* while continuing to set the bar for reliability, and 2-stroke oil and fuel economy. *Observed HP measured on internal dyno test in optimal conditions for 2-stroke engines.**Based on internal engineering testing compared to 600 H.O. E-TEC. REV GEN4 PLATFORM:The 4th generation of the REV platform is designed around aggressive trail riders with a narrow, compact package giving the rider more freedom to move and influence the sled. More centralized masses (especially side-to-side), light weight and industry-leading suspensions make the vehicle ultra responsive. PDRIVE CLUTCH: A major factor in the quickness of REV Gen4 sleds is the new pDrive clutch. Fast and friction-free dual rollers transfer torque in place of traditional sliding buttons on this 100% new clutch. The oversize rollers with needle bearings, wide flyweights and shaft-on-shaft design emphasize smooth operation and long life. Ultra-responsive shifting, impressive RPM consistency and 2.8 lb./ 1.3 kg lighter than the TRA VII. RS RUNNING BOARDS: Designed for aggressive stand-up riding, they are flatter for most of their length, wider and strong. Thicker aluminum sheet (3 mm vs. 1.8 mm), plus front and rear reinforcements to withstand tough landings.

$13,249

Bemidji Sports Centre
Bemidji, MN
Rider Balanced Control AXYS® CHASSIS: The AXYS chassis for the 144 platform is light and strong, offering rider balanced characteristics critical for the 50/50 rider. The rider is moved into a balanced position on the sled so it rides flat through the corners. When the trail gets rough or the rider jumps off into the powder, rider balance enables the rider to move back and make the front end light to climb up on top of the snow or the moguls. RIDER BALANCED CONTROL: Rider Balanced Control gives the rider: 1) Flatter cornering without sacrificing the fun factor. 2) More precise handling in all conditions. 3) Better control in big bumps AND chatter bumps. RIDER BALANCED POSITIONING: On the AXYS® chassis, the rider is moved forward to a more balanced position. The rider’s hands are moved 4.5” forward, the feet are 2” forward, the knees are 4.5” forward, and the seat is 4.5” forward. In the neutral riding position, the AXYS® platform provides bite for flatter, positive cornering. When the trail gets rough or the rider jumps off into the powder, rider balance enables the rider to move back and make the front end light to climb up on top of the snow or the moguls. PRO XC REAR SUSPENSION: The completely redesigned geometry of the PRO-XC™ progressive-rate rear suspension is optimized for the best performance and Rider-Balanced Control. Through innovative Polaris engineering and construction, the suspension is both lighter and stronger, featuring: 1) Lightweight, forged aluminum rear crank. 2) Completely redesigned crank and pivot. 3) Front torque arm was moved rearward to control pitch, increase travel, and improve the rail profile. ACTIVE PITCH CONTROL: The PRO-XC™ suspension delivers Active Pitch Control™ which controls the pitch by suspension geometry and not simply by a high spring rate. This makes the sled less sensitive to adjustment while allowing optimal weight transfer.

$14,299

Bemidji Sports Centre
Bemidji, MN
Features ROTAX 850 E-TEC ENGINE: The most powerful 2-stroke engine in the industry.* It pumps out 10 more horsepower (165 hp) than its predecessor, but its responsiveness is what really shines. With the new pDrive primary clutch, it’s 30% quicker responding than the 800R E-TEC giving you the instant control you demand. E-TEC SHOT ENGINE STARTER: Push-button starting with almost no added weight. After an initial pull-start, the engine charges an ultracapacitor. Pushing the handlebar SHOT button for subsequent starts uses energy stored in the ultracapacitor to turn the magneto into an electric motor that rotates the flywheel, and with E-TEC technology, starts the engine. Eliminates nearly 20 lb. (9 kg) compared to conventional electric start. SHOT starting is only possible with Ski-Doo-exclusive E-TEC technology. REV Gen4 PLATFORM: Key to the Freeride’s agility is the extreme mass centralization of the 4th generation REV platform. The trademark pyramidal frame, new die-cast aluminum front suspension module and new heat exchanger design ensure it’s strong, yet lightweight. PDRIVE CLUTCH: A major factor in the quickness of REV sleds is the new pDrive clutch. Fast and friction-free dual rollers transfer torque in place of traditional sliding buttons on this 100% clutch. The oversize rollers with needle bearings, wide flyweights and shaft-on-shaft design emphasize smooth operation and long life. Ultra-responsive shifting, impressive RPM consistency and 2.8 lb./ 1.3 kg lighter than the TRA VII.

$14,199

Bemidji Sports Centre
Bemidji, MN
Features ROTAX 850 E-TEC ENGINE: The most powerful 2-stroke engine in the industry. It pumps out 10 more horsepower (165 hp) than its predecessor, but its responsiveness is what really shines. With the new pDrive primary clutch, it’s 30% quicker responding than the 800R E-TEC giving you the instant control you demand. PDRIVE CLUTCH: A major factor in the quickness of REV sleds is the new pDrive clutch. Fast and friction-free dual rollers transfer torque in place of traditional sliding buttons on this advanced clutch. The oversize rollers with needle bearings, wide flyweights and shaft-on-shaft design emphasize smooth operation and long life. Ultra-responsive shifting, impressive RPM consistency and 2.8 lb. (1.3 kg) lighter than the TRA VII. REV GEN4 PLATFORM: The 4th generation of the REV platform is designed around aggressive trail riders with a narrow, compact package giving the rider more freedom to move and influence the sled. More centralized masses (especially side-to-side), light weight and industry-leading suspensions make the vehicle ultra responsive. CMOTION REAR SUSPENSION: Crossover-specific suspension uses best principles of the rMotion trail and tMotion mountain skids for confident cornering and agile boondocking – such as rigid front and rear arms with excellent weight transfer. It also features a rising-rate motion ratio, like the latest generation of Ski-Doo rear suspensions, to provide superior control and comfort. Tipped rails enable better cornering, boost top-end speed and fuel efficiency. RAS 3 CROSSOVER FRONT SUSPENSION: Unique geometry and steering on the RAS 3 for capability and light steering on and off trail. Optimized for crossover usage, two ski stance positions dial in handling: 40.1 in. (102 cm) or 38.4 in. (97.5 cm). OPEN TOE-HOLD: Enables rider to naturally pivot their outside foot outward in aggressive cornering. (Alternative toe holds available as accessories) HPG PLUS SHOCKS: Highest quality aluminum-bodied high pressure gas shocks by KYB. Rebuildable and revalvable. 15 X 146 X 1.6 COBRA: This track features combination of flexible cupped lugs for superior off-trail performance and more rigid lugs for added traction on hard-packed snow.

$13,549

Bemidji Sports Centre
Bemidji, MN
Features ROTAX 850 E-TEC ENGINE: The most powerful 2-stroke engine in the industry.* It pumps out 10 more horsepower (165 hp) than its predecessor, but its responsiveness is what really shines. With the new pDrive primary clutch, it’s 30% quicker responding than the 800R E-TEC giving you the instant control you demand. *Observed HP measured on internal dyno test in optimal conditions for 2-stroke engines. PDRIVE CLUTCH: A major factor in the quickness of REV Gen4 sleds is the new pDrive clutch. Fast and friction-free dual rollers transfer torque in place of traditional sliding buttons on this 100% new clutch. The oversize rollers with needle bearings, wide flyweights and shaft-on-shaft design emphasize smooth operation and long life. Ultra-responsive shifting, impressive RPM consistency and 2.8 lb. (1.3 kg) lighter than the TRA VII. REV GEN4 PLATFORM: Created with the Rotax 850 E-TEC engine to be the ultimate handling trail snowmobile. The 4th generation of the REV Gen4 platform is designed around aggressive trail riders with a narrow, compact package giving the rider more freedom to move and influence the sled. More centralized masses (especially side-to-side), light weight and industry-leading suspensions make the vehicle ultra responsive. RAS 3 FRONT SUSPENSION: Similar geometry and design to the stable and precise RAS 2, optimized for the REV Gen4 platform with 1 in. (25 mm) added suspension stroke and 0.7 lb. (3.2 kg) reduced weight vs. RAS 2. Even more precise with rack steering system that eliminates all bump steer. RMOTION REAR SUSPENSION: Provides more capability, more comfort and more adjustability. Separate spring and shock dynamics combine with the most rising-rate / progressive motion ratio in the industry to give the rMotion suspension a supple ride in small bumps with added capability in large ones. And there’s no need to be a suspension guru to enjoy the ride – with its broad sweet spot, you can set it up once and it will perform impressively in nearly every condition.

$15,049

Bemidji Sports Centre
Bemidji, MN
Immediate response LIGHTWEIGHT: Polaris snowmobiles are the lightest sleds on the mountain. Polaris®mountain sleds have always been light AND rigid with added strength & durability while reducing weight on the RMK® AXYS® platform. Polaris uses design optimization software to analyze the loads and stress points for various systems and components of the snowmobile which allows the team to design lightweight yet durable snowmobiles. Providing riders with instantaneous lift, Polaris sleds help riders get up on top of the snow faster. POWDERTRAC™ RUNNING BOARDS: The PowderTrac™ running boards have been developed for maximum snow clean out and maximum strength. Built from extruded aluminum with bonded cast lugs, they boast an open area of over 50% and integrated traction that is machined in for sure footed performance. There is now additional open space at the back of the boards by the rear pad to reduce snow build up.

$13,499

Bemidji Sports Centre
Bemidji, MN
Rider Balanced Control AXYS® CHASSIS: The AXYS® Switchback® XCR features the AXYS® chassis and IQR handlebars with an aluminum overstructure. The chassis structure and design makes it possible to change the rider positioning, centralize vehicle mass, redesign the rear suspension, add more power, remove weight, and evolve the rider’s experience. In short, it is the key to delivering rider-balanced® control, unrivaled acceleration, and rider-centric comfort. RIDER BALANCED CONTROL: Rider Balanced Control gives the rider: Flatter cornering without sacrificing the fun factor. More precise handling in all conditions. Better control in big bumps AND chatter bumps. How did we get there? Polaris: Put the rider in the right location on the sled. Centralized vehicle mass. Optimized the suspension geometry to better control pitch. RIDER BALANCED POSITIONING: On the AXYS® chassis, the rider is moved forward to a more balanced position. The rider’s hands are moved 4.5 in. forward, the feet are 2 in. forward, the knees are 4.5 in. forward, and the seat is 4.5 in. forward. In the neutral riding position, the AXYS® platform provides bite for flatter, positive cornering. When the trail gets rough or the rider jumps off into the powder, rider balance enables the rider to move back and make the front end light to climb up on top of the snow or the moguls. PRO-XC™ SUSPENSION WITH POLARIS RACE TECHNOLOGY (PRT): The completely redesigned geometry of the PRO-XC™ progressive-rate rear suspension is optimized for the best performance and Rider-Balanced Control. Through innovative Polaris engineering and construction, the suspension is both lighter and stronger, featuring: Lightweight, forged aluminum rear crank. Completely redesigned crank and pivot. Front torque arm was moved rearward to control pitch, increase travel, and improve the rail profile. To increase durability & strength for extreme performance, the XCR features additional Race-Inspired Suspension Components, including a Chromoly rear pivot, heavy-duty fts mount, solid “hardened” jackshaft, Chromoly front torque arm, strength-optimized, reinforced rail beams, solid bogie wheels, and IQR rear axle wheels.

$12,399

Bemidji Sports Centre
Bemidji, MN
Immediate Response LIGHTWEIGHT - 408 LBS: Polaris snowmobiles are the lightest sleds on the mountain. Polaris® mountain sleds have always been light AND rigid, and Polaris has added strength & durability while reducing weight on the RMK® AXYS® platform. Polaris uses design optimization software to analyze the loads and stress points for various systems and components of the snowmobile which allows the team to design lightweight yet durable snowmobiles. Providing riders with instantaneous lift, Polaris sleds help riders get up on top of the snow faster due to the lighter weight, increase in power from the new 800 H.O. Cleanfire® Engine, new Polaris-exclusive track designs and the new raised chassis. FORGED ALUMINUM A-ARMS: Polaris continuously pursues new innovations and technology, and for 2016 the Polaris® RMK® features an industry-first...forged a-arms. The one-piece, forged a-arms are lighter (approximately 1.5 lbs lighter) while providing optimal strength. Forging is widely used and proven through the automotive industry. This design reduces unsprung mass leading to a better ride quality and increased maneuvarability. POWDER TRAC™ RUNNING BOARDS: The PowderTrac™ running boards have been developed for maximum snow clean out and maximum strength. Built from extruded aluminum with bonded cast lugs, they boast an open area of over 50% and integrated traction that is machined in for sure footed performance. For 2016, we continued to refine and improve the running boards. There is now additional open space at the back of the boards by the rear pad to reduce snow build up.

$12,899

Bemidji Sports Centre
Bemidji, MN
Features ROTAX 850 E-TEC ENGINE: The most powerful 2-stroke engine in the industry.* It pumps out 10 more horsepower (165 hp) than its predecessor, but its responsiveness is what really shines. With the new pDrive primary clutch, it’s 30% quicker responding than the 800R E-TEC giving you the instant control you demand. *Observed HP measured on internal dyno test in optimal conditions for 2-stroke engines. REV GEN4 PLATFORM: Key to the Summit’s agility is the extreme mass centralization of the 4th generation REV platform. The 850 E-TEC engine is compact and centered between the skis, making the vehicle easy to roll. The trademark pyramidal frame, new die-cast aluminum front suspension module and new heat exchanger design ensure it’s strong, yet lightweight. PDRIVE CLUTCH: A major factor in the quickness of REV sleds is the new pDrive clutch. Fast and friction-free dual rollers transfer torque in place of traditional sliding buttons on this 100% new clutch. The oversize rollers with needle bearings, wide flyweights and shaft-on-shaft design emphasize smooth operation and long life. Ultra-responsive shifting, impressive RPM consistency and 2.8 lb./ 1.3 kg lighter than the TRA VII. TMOTION REAR SUSPENSION: The tMotion flexes laterally, reducing the effort to initiate a roll, due to a ball joint at the center hinge between the rear arm and drop link and split flat-tube front arms. Very progressive motion ratio makes the ride on trails even more comfortable. POWDERMAX LIGHT TRACK WITH FLEXEDGE: New 3.5 in. (9 cm) pitch reduces weight, and keeps snow between lugs for added performance. Exclusive 16-in (41-cm) wide design adds flotation and traction without sacrificing manoeuvrability. Edges flex to reduce the effort to initiate roll-up. Available in either 2.5 or 3.0 in (6.3 or 7.63 cm) lug heights.

$13,649

Bemidji Sports Centre
Bemidji, MN
Rider Balanced Control AXYS® CHASSIS: The AXYS® chassis features 93% new parts, including a carbon-fiber overstructure and aluminum handlebars on SnowCheck Select or Limited Edition models and an aluminum overstructure on standard models. The chassis structure and design makes it possible to change the rider positioning, centralize vehicle mass, redesign the rear suspension, add more power, remove weight, and evolve the rider’s riding experience. In short, it is the key to delivering rider-balanced control, unrivaled acceleration, and rider-centric comfort. RIDER BALANCED CONTROL: Rider Balanced Control gives the rider: Flatter cornering without sacrificing the fun factor More precise handling in all conditions Better control in big bumps AND chatter bumps How did we get there? Polaris: Put the rider in the right location on the sled. Centralized vehicle mass. Optimized the suspension geometry to better control pitch. RIDER BALANCED POSITIONING: On the AXYS® chassis, the rider is moved forward to a more balanced position. The rider’s hands are moved 4.5” forward, the feet are 2” forward, the knees are 4.5” forward, and the seat is 4.5” forward. In the neutral riding position, the AXYS® platform provides bite for flatter, positive cornering. When the trail gets rough or the rider jumps off into the powder, rider balance enables the rider to move back and make the front end light to climb up on top of the snow or the moguls PRO-XC™ REAR SUSPENSION: The completely redesigned geometry of the PRO-XC progressive-rate rear suspension is optimized for the best performance and Rider-Balanced Control. Through innovative Polaris engineering and construction, the suspension is both lighter and stronger, featuring: Lightweight, forged aluminum rear crank. Completely redesigned crank and pivot. Front torque arm was moved rearward to control pitch, increase travel, and improve the rail profile. ACTIVE PITCH CONTROL™: The PRO-XC™ suspension delivers Active Pitch Control™ which controls the pitch by suspension geometry and not simply by a high spring rate. This makes the sled less sensitive to adjustment while allowing optimal weight transfer.

$11,499

Bemidji Sports Centre
Bemidji, MN
Features ROTAX 900 ACE TURBO ENGINE: The 150-horsepower* Rotax 900 ACE Turbo delivers instant acceleration at the punch of the throttle. With a Rotax-built turbocharger specifically designed for the 900 ACE engine, riders get the technology they love with the reliable, powerful performance they demand in one advanced engine package. Like the base 900 ACE, this turbocharged engine also includes drive-by-wire intelligent Throttle Control (iTC) with three driving modes (Sport, Standard, ECO) and finger throttle. *Observed HP metric based on internal dyno test in optimal conditions. PDRIVE CLUTCH: A major factor in the quickness of REV Gen4 sleds is the new pDrive clutch. Fast and friction-free dual rollers transfer torque in place of traditional sliding buttons on this 100% new clutch. The oversize rollers with needle bearings, wide flyweights and shaft-on-shaft design emphasize smooth operation and long life. Ultra-responsive shifting, impressive RPM consistency and 2.8 lb. (1.3 kg) lighter than the TRA VII. REV GEN4 PLATFORM: Created with the Rotax 850 E-TEC engine to be the ultimate handling trail snowmobile. The 4th generation of the REV Gen4 platform is designed around aggressive trail riders with a narrow, compact package giving the rider more freedom to move and influence the sled. More centralized masses (especially side-to-side), light weight and industry-leading suspensions make the vehicle ultra responsive. RAS 3 FRONT SUSPENSION: Similar geometry and design to the stable and precise RAS 2, optimized for the REV Gen4 platform with 1 in. (25 mm) added suspension stroke and 0.7 lb. (3.2 kg) reduced weight vs. RAS 2. Even more precise with rack steering system that eliminates all bump steer. RMOTION REAR SUSPENSION: Provides more capability, more comfort and more adjustability. Separate spring and shock dynamics combine with the most rising-rate / progressive motion ratio in the industry to give the rMotion suspension a supple ride in small bumps with added capability in large ones. And there’s no need to be a suspension guru to enjoy the ride – with its broad sweet spot, you can set it up once and it will perform impressively in nearly every condition.

$15,649

Bemidji Sports Centre
Bemidji, MN
Rider Balanced Control AXYS® CHASSIS: The AXYS® chassis structure and design makes it possible to change the rider positioning, centralize vehicle mass, redesign the rear suspension, add more power, remove weight, and evolve the rider’s riding experience. In short, it is the key to delivering rider-balanced control, unrivaled acceleration, and rider-centric comfort. RIDER BALANCED CONTROL: Rider Balanced Control gives the rider: 1. Flatter cornering without sacrificing the fun factor. 2. More precise handling in all conditions. 3. Better control in big bumps AND chatter bumps. RIDER BALANCED POSITIONING: On the AXYS® chassis, the rider is moved forward to a more balanced position. The rider’s hands are moved 4.5 in. forward, the feet are 2 in. forward, the knees are 4.5 in. forward, and the seat is 4.5 in. forward. In the neutral riding position, the AXYS® platform provides bite for flatter, positive cornering. When the trail gets rough or the rider jumps off into the powder, rider balance enables the rider to move back and make the front end light to climb up on top of the snow or the moguls. PRO-XC™ REAR SUSPENSION: The completely redesigned geometry of the PRO-XC progressive-rate rear suspension is optimized for the best performance and Rider-Balanced Control. Through innovative Polaris engineering and construction, the suspension is both lighter and stronger, featuring: 1. Lightweight, forged aluminum rear crank. 2. Completely redesigned crank and pivot. 3. Front torque arm was moved rearward to control pitch, increase travel, and improve the rail profile. ACTIVE PITCH CONTROL™: The PRO-XC™ suspension delivers Active Pitch Control™ which controls the pitch by suspension geometry and not simply by a high spring rate. This makes the sled less sensitive to adjustment while allowing optimal weight transfer.

$12,197

Bemidji Sports Centre
Bemidji, MN
Immediate Response LIGHTWEIGHT: Polaris snowmobiles are the lightest sleds on the mountain. Polaris® mountain sleds have always been light AND rigid, and Polaris has added strength & durability while reducing weight on the RMK® AXYS® platform. Polaris uses design optimization software to analyze the loads and stress points for various systems and components of the snowmobile which allows the team to design lightweight yet durable snowmobiles. Providing riders with instantaneous lift, Polaris sleds help riders get up on top of the snow faster due to the lighter weight, increase in power from the 800 H.O. Cleanfire® Engine, Polaris-exclusive track designs and the raised chassis. FORGED ALUMINUM A-ARMS: The one-piece, forged a-arms are lighter (approximately 1.5 lb. lighter) while providing optimal strength. Forging is widely used and proven through the automotive industry. This design reduces unsprung mass leading to a better ride quality and increased maneuverability. POWDERTRAC™ RUNNING BOARDS: The PowderTrac™ running boards have been developed for maximum snow clean out and maximum strength. Built from extruded aluminum with bonded cast lugs, they boast an open area of over 50% and integrated traction that is machined in for sure footed performance. There is now additional open space at the back of the boards by the rear pad to reduce snow build up.

$13,897

Bemidji Sports Centre
Bemidji, MN
Immediate Response LIGHTWEIGHT - 408 LBS.: Polaris snowmobiles are the lightest sleds on the mountain. Polaris® mountain sleds have always been light AND rigid, and Polaris has added strength & durability while reducing weight on the RMK® AXYS® platform. Polaris uses design optimization software to analyze the loads and stress points for various systems and components of the snowmobile which allows the team to design lightweight yet durable snowmobiles. Providing riders with instantaneous lift, Polaris sleds help riders get up on top of the snow faster due to the lighter weight, increase in power from the new 800 H.O. Cleanfire® Engine, new Polaris-exclusive track designs and the new raised chassis. FORGED ALUMINUM A-ARMS: Polaris continuously pursues new innovations and technology, and for 2016 the Polaris® RMK® features an industry-first...forged a-arms. The one-piece, forged a-arms are lighter (approximately 1.5 lbs lighter) while providing optimal strength. Forging is widely used and proven through the automotive industry. This design reduces unsprung mass leading to a better ride quality and increased maneuvarability. POWDERTRAC™ RUNNING BOARDS: The PowderTrac™ running boards have been developed for maximum snow clean out and maximum strength. Built from extruded aluminum with bonded cast lugs, they boast an open area of over 50% and integrated traction that is machined in for sure footed performance. For 2016, we continued to refine and improve the running boards. There is now additional open space at the back of the boards by the rear pad to reduce snow build up.

$13,999

Bemidji Sports Centre
Bemidji, MN
Immediate Response FORGED ALUMINUM A-ARMS: Polaris continuously pursues new innovations and technology, and for 2016 the Polaris® RMK® features an industry-first...forged a-arms. The one-piece, forged a-arms are lighter (approximately 1.5 lbs lighter) while providing optimal strength. Forging is widely used and proven through the automotive industry. This design reduces unsprung mass leading to a better ride quality and increased maneuvarability. LIGHTWEIGHT: Polaris snowmobiles are the lightest sleds on the mountain. Polaris® mountain sleds have always been light AND rigid, and Polaris has added strength & durability while reducing weight on the RMK® AXYS® platform. Polaris uses design optimization software to analyze the loads and stress points for various systems and components of the snowmobile which allows the team to design lightweight yet durable snowmobiles. Providing riders with instantaneous lift, Polaris sleds help riders get up on top of the snow faster due to the lighter weight, increase in power from the new 800 H.O. Cleanfire® Engine, new Polaris-exclusive track designs and the new raised chassis. POWDERTRAC™ RUNNING BOARDS: The PowderTrac™ running boards have been developed for maximum snow clean out and maximum strength. Built from extruded aluminum with bonded cast lugs, they boast an open area of over 50% and integrated traction that is machined in for sure footed performance. For 2016, we continued to refine and improve the running boards. There is now additional open space at the back of the boards by the rear pad to reduce snow build up.

$13,997

Bemidji Sports Centre
Bemidji, MN
Immediate Response LIGHTWEIGHT: Polaris snowmobiles are the lightest sleds on the mountain. Polaris® mountain sleds have always been light AND rigid, and Polaris has added strength & durability while reducing weight on the RMK® AXYS® platform. Polaris uses design optimization software to analyze the loads and stress points for various systems and components of the snowmobile which allows the team to design lightweight yet durable snowmobiles. Providing riders with instantaneous lift, Polaris sleds help riders get up on top of the snow faster due to the lighter weight, increase in power from the new 600 H.O. Cleanfire® Engine, new Polaris-exclusive track designs and the new raised chassis. FORGED ALUMINUM A-ARMS: Polaris continuously pursues new innovations and technology, and for 2016 the Polaris® RMK® features an industry-first...forged a-arms. The one-piece, forged a-arms are lighter (approximately 1.5 lbs lighter) while providing optimal strength. Forging is widely used and proven through the automotive industry. This design reduces unsprung mass leading to a better ride quality and increased maneuvarability. POWDERTRAC™ RUNNING BOARDS: The PowderTrac™ running boards have been developed for maximum snow clean out and maximum strength. Built from extruded aluminum with bonded cast lugs, they boast an open area of over 50% and integrated traction that is machined in for sure footed performance. For 2016, we continued to refine and improve the running boards. There is now additional open space at the back of the boards by the rear pad to reduce snow build up.

$12,699

Bemidji Sports Centre
Bemidji, MN
Features ROTAX 850 E-TEC ENGINE: The most powerful 2-stroke engine in the industry.* It pumps out 10 more horsepower (165 hp) than its predecessor, but its responsiveness is what really shines. With the new pDrive primary clutch, it’s 30% quicker responding than the 800R E-TEC giving you the instant control you demand. E-TEC SHOT ENGINE STARTER: Push-button starting with almost no added weight. After an initial pull-start, the engine charges an ultracapacitor. Pushing the handlebar SHOT button for subsequent starts uses energy stored in the ultracapacitor to turn the magneto into an electric motor that rotates the flywheel, and with E-TEC technology, starts the engine. Eliminates nearly 20 lb. (9 kg) compared to conventional electric start. SHOT starting is only possible with Ski-Doo-exclusive E-TEC technology. REV Gen4 PLATFORM: Key to the Freeride’s agility is the extreme mass centralization of the 4th generation REV platform. The trademark pyramidal frame, new die-cast aluminum front suspension module and new heat exchanger design ensure it’s strong, yet lightweight. PDRIVE CLUTCH: A major factor in the quickness of REV sleds is the new pDrive clutch. Fast and friction-free dual rollers transfer torque in place of traditional sliding buttons on this 100% clutch. The oversize rollers with needle bearings, wide flyweights and shaft-on-shaft design emphasize smooth operation and long life. Ultra-responsive shifting, impressive RPM consistency and 2.8 lb./ 1.3 kg lighter than the TRA VII.

$15,449

Bemidji Sports Centre
Bemidji, MN
Features ROTAX 850 E-TEC ENGINE: The most powerful 2-stroke engine in the industry.* It pumps out 10 more horsepower (165 hp) than its predecessor, but its responsiveness is what really shines. With the new pDrive primary clutch, it’s 30% quicker responding than the 800R E-TEC giving you the instant control you demand. *Observed HP measured on internal dyno test in optimal conditions for 2-stroke engines. PDRIVE CLUTCH: A major factor in the quickness of REV Gen4 sleds is the new pDrive clutch. Fast and friction-free dual rollers transfer torque in place of traditional sliding buttons on this 100% new clutch. The oversize rollers with needle bearings, wide flyweights and shaft-on-shaft design emphasize smooth operation and long life. Ultra-responsive shifting, impressive RPM consistency and 2.8 lb. (1.3 kg) lighter than the TRA VII. REV GEN4 PLATFORM: Created with the Rotax 850 E-TEC engine to be the ultimate handling trail snowmobile. The 4th generation of the REV Gen4 platform is designed around aggressive trail riders with a narrow, compact package giving the rider more freedom to move and influence the sled. More centralized masses (especially side-to-side), light weight and industry-leading suspensions make the vehicle ultra responsive. RAS 3 FRONT SUSPENSION: Similar geometry and design to the stable and precise RAS 2, optimized for the REV Gen4 platform with 1 in. (25 mm) added suspension stroke and 0.7 lb. (3.2 kg) reduced weight vs. RAS 2. Even more precise with rack steering system that eliminates all bump steer. RMOTION REAR SUSPENSION: Provides more capability, more comfort and more adjustability. Separate spring and shock dynamics combine with the most rising-rate / progressive motion ratio in the industry to give the rMotion suspension a supple ride in small bumps with added capability in large ones. And there’s no need to be a suspension guru to enjoy the ride – with its broad sweet spot, you can set it up once and it will perform impressively in nearly every condition.

$15,749

Bemidji Sports Centre
Bemidji, MN
Rider Balanced Control AXYS® CHASSIS: The AXYS chassis for the 144 platform is light and strong, offering rider balanced characteristics critical for the 50/50 rider. The rider is moved into a balanced position on the sled so it rides flat through the corners. When the trail gets rough or the rider jumps off into the powder, rider balance enables the rider to move back and make the front end light to climb up on top of the snow or the moguls. IGX: A core element to the AXYS 144 platform is the IGX 144 uncoupled rear suspension, which offers the ultimate blend of durability and strength. The IGX 144 rear suspension provides RMK-inspired off-trail agility and balance with a drastically improved on-trail ride. Pitch is controlled through geometry in this rear suspension. And with 43% more front torque arm travel, this sled features reduced bottoming and less drag off-trail. An optimized, lighter, reinforced tipped rail beam design gives the sled a nimble feel. POWDERTRAC™ HYBRID RUNNING BOARDS: The PowderTrac Hybrid running boards offer optimized design with 56% open space for maximum snow clean out while maintaining extreme strength. 1) Designed to serve the needs of riders on- & off-trail. 2) Efficient design delivers maximum strength & snow clean-out with 56% open space. 3) Front is wide & flat for foot comfort & stability; rear has tapered, dual-angle design for mobility & snow clearance

$13,099

Bemidji Sports Centre
Bemidji, MN
Comfort STEALTH CONTROL SYSTEM: The handle bar controls feature a left hand switch cluster which allows for "on the fly" access to the IQS electronic suspension adjustments along with multi-step hand and thumb warmer adjusters. Information available on the multi-function gauge can be easily selected with a toggle switch and the push button reverse gear switch is also located in the left hand cluster. The right side of the bar is clean with a new ergonomically shaped throttle lever and simple, stand-alone emergency stop switch. A Hayes brake cylinder equipped with a composite "shortie" brake lever provides greater modulation for better feel and powerful stopping performance. TAPERED TUNNEL DESIGN: The light weight, two-piece, tapered tunnel of the Sidewinder L-TX LE gives you strength for the long haul and a tapered "fit" for enhanced leg comfort and overall ride positioning. The reinforced running boards are punched with aggressive boot hold serrations and offers excellent snow evacuation to keep your feet planted where you want them. HANDLE BAR CONTROLLED, DIGITAL GAUGE: Full-featured and easy to read, the digital gauge displays critical information in a glance including speed, fuel level, trip mileage, tach and more. Changing functions is now made easy with the controls on the left handle bar. We even included a clock so you can watch the time fly. PUSH BUTTON REVERSE: Convenient handlebar positioning makes shifting to and from reverse easy with just the push of your thumb. A servo motor shifts the drivetrain into reverse simply and consistently. An audible warning beeper reminds you when you are still in reverse.

$15,799

Bemidji Sports Centre
Bemidji, MN
Features REV-XU PLATFORM: This base architecture and design sets the standard for light weight, durability and handling. Flexible riding position enables comfort sitting and standing. Driver can stretch their legs due to forward foot position. Cab and bottom pan shapes are optimized for flotation and snow flow. Styling is rugged and dynamic. SC-5U REAR SUSPENSION: Our sport-utility suspension. Refined ride both on trail and on top of powder. Articulated rail to maximize deep snow traction in reverse or locked out when towing. AIR CONTROL SUSPENSION: Driver chooses one of five preload settings for the rear air spring – on-the-fly – with just the touch of a handlebar rocker switch. Wide range of adjustment for tailoring the ride for load or trail conditions. RAS 2 FRONT SUSPENSION: Ultimate geometry and lighter components deliver excellent precision and stability – especially in extreme bumps – and reduces roll in corners. Sharp styling, too. ROTAX 4-STROKE ENGINES: Choose from two advanced performance four-stroke engines: the 1200 4-TEC and 900 ACE. Both feature our intelligent Throttle Control (iTC) technology, which significantly increases throttle response, includes three performance driving modes and operation as either a thumb- or finger-throttle. the 1200 4-TEC delivers 130 hp and up to 19 mpg (12.3 L/100km) in ECO mode; the 900 ACE 90 hp with up to 21.8 mpg, 10,8 L/ 100 km). FINGER THROTTLE: The throttle block can be rotated forward for use as a finger throttle, if preferred. Great for changing hand positions on a long ride and for more control in bumps. SYNCHROMESH TRANSMISSION: Take off from a stop smoothly, even with a heavy load, thanks to two forward and one reverse gears. Inline 2-1-N-R pattern on right side and can be safely shifted from High to Low while on the fly. WARN WINCH: 1,500 pound (680 kg) capacity, complete with remote with 10-foot (3 m) lead and 40 feet (12.2 m) of synthetic rope. CARGO BOX: Rugged 20 gal (75 L) injection molded tunnel cargo box adds even more weatherproof storage.

$13,599

Bemidji Sports Centre
Bemidji, MN
Immediate Response LIGHTWEIGHT - 408 LBS: Polaris snowmobiles are the lightest sleds on the mountain. Polaris® mountain sleds have always been light AND rigid, and Polaris has added strength & durability while reducing weight on the RMK® AXYS® platform. Polaris uses design optimization software to analyze the loads and stress points for various systems and components of the snowmobile which allows the team to design lightweight yet durable snowmobiles. Providing riders with instantaneous lift, Polaris sleds help riders get up on top of the snow faster due to the lighter weight, increase in power from the new 800 H.O. Cleanfire® Engine, new Polaris-exclusive track designs and the new raised chassis. FORGED ALUMINUM A-ARMS: Polaris continuously pursues new innovations and technology, and for 2016 the Polaris® RMK® features an industry-first...forged a-arms. The one-piece, forged a-arms are lighter (approximately 1.5 lbs lighter) while providing optimal strength. Forging is widely used and proven through the automotive industry. This design reduces unsprung mass leading to a better ride quality and increased maneuvarability. POWDER TRAC™ RUNNING BOARDS: The PowderTrac™ running boards have been developed for maximum snow clean out and maximum strength. Built from extruded aluminum with bonded cast lugs, they boast an open area of over 50% and integrated traction that is machined in for sure footed performance. For 2016, we continued to refine and improve the running boards. There is now additional open space at the back of the boards by the rear pad to reduce snow build up.

$13,297

Bemidji Sports Centre
Bemidji, MN
Rider Balanced Control AXYS® CHASSIS: The AXYS® chassis features 93% new parts, including a carbon-fiber overstructure and aluminum handlebars on SnowCheck Select or Limited Edition models and an aluminum overstructure on standard models. The chassis structure and design makes it possible to change the rider positioning, centralize vehicle mass, redesign the rear suspension, add more power, remove weight, and evolve the rider’s riding experience. In short, it is the key to delivering rider-balanced control, unrivaled acceleration, and rider-centric comfort. RIDER BALANCED CONTROL: Rider Balanced Control gives the rider: Flatter cornering without sacrificing the fun factor More precise handling in all conditions Better control in big bumps AND chatter bumps How did we get there? Polaris: Put the rider in the right location on the sled. Centralized vehicle mass. Optimized the suspension geometry to better control pitch. RIDER BALANCED POSITIONING: On the AXYS® chassis, the rider is moved forward to a more balanced position. The rider’s hands are moved 4.5” forward, the feet are 2” forward, the knees are 4.5” forward, and the seat is 4.5” forward. In the neutral riding position, the AXYS® platform provides bite for flatter, positive cornering. When the trail gets rough or the rider jumps off into the powder, rider balance enables the rider to move back and make the front end light to climb up on top of the snow or the moguls PRO-XC™ REAR SUSPENSION: The completely redesigned geometry of the PRO-XC progressive-rate rear suspension is optimized for the best performance and Rider-Balanced Control. Through innovative Polaris engineering and construction, the suspension is both lighter and stronger, featuring: Lightweight, forged aluminum rear crank. Completely redesigned crank and pivot. Front torque arm was moved rearward to control pitch, increase travel, and improve the rail profile. ACTIVE PITCH CONTROL™: The PRO-XC™ suspension delivers Active Pitch Control™ which controls the pitch by suspension geometry and not simply by a high spring rate. This makes the sled less sensitive to adjustment while allowing optimal weight transfer.

$11,897

Bemidji Sports Centre
Bemidji, MN
Features ROTAX 850 E-TEC ENGINE: The most powerful 2-stroke engine in the industry.* It pumps out 10 more horsepower (165 hp) than its predecessor, but its responsiveness is what really shines. With the new pDrive primary clutch, it’s 30% quicker responding than the 800R E-TEC giving you the instant control you demand. E-TEC SHOT ENGINE STARTER: Push-button starting with almost no added weight. After an initial pull-start, the engine charges an ultracapacitor. Pushing the handlebar SHOT button for subsequent starts uses energy stored in the ultracapacitor to turn the magneto into an electric motor that rotates the flywheel, and with E-TEC technology, starts the engine. Eliminates nearly 20 lb. (9 kg) compared to conventional electric start. SHOT starting is only possible with Ski-Doo-exclusive E-TEC technology. REV Gen4 PLATFORM: Key to the Freeride’s agility is the extreme mass centralization of the 4th generation REV platform. The trademark pyramidal frame, new die-cast aluminum front suspension module and new heat exchanger design ensure it’s strong, yet lightweight. PDRIVE CLUTCH: A major factor in the quickness of REV sleds is the new pDrive clutch. Fast and friction-free dual rollers transfer torque in place of traditional sliding buttons on this 100% clutch. The oversize rollers with needle bearings, wide flyweights and shaft-on-shaft design emphasize smooth operation and long life. Ultra-responsive shifting, impressive RPM consistency and 2.8 lb./ 1.3 kg lighter than the TRA VII.

$14,599

Bemidji Sports Centre
Bemidji, MN