About: Ski-doo Snowmobiles

The 2020 Summit X changes the mindset of a deep snow rider with its effortless deep-snow agility, and instant power. It dares you to leave nothing on the table each and every ride - and rewards you every time you do. Package Highlights Rotax® 850 E-TEC® engine RAS™ 3 front suspension REV® Gen4 platform with narrow-design bodywork pDrive™ clutch with clickers Ergo-Step side panels Compact digital gauge Full-length extruded profile running boards with large openings tMotion™ rear suspension with ice scratchers PowderMax® Light with FlexEdge™ track choice: 16 × 154 / 165 × 2.5 in. or 16 x 154 / 165 / 175 x 3.0 in.* Brembo racing brake with braided stainless-steel brake line RER™ electronic reverse RF D.E.S.S.™ key Sea-level calibration available on all configurations Warm glove box with 4 L / 1 US gal of storage Pilot™ DS 3 skis Stiff grab handle on handlebar

ROTAX 850 E-TEC ENGINE: The most powerful 2-stroke engine in the industry.* It pumps out 10 more horsepower (165 hp) than its predecessor, but its responsiveness is what really shines. With the pDrive primary clutch, it’s 30% quicker responding than the 800R E-TEC giving you the instant acceleration you demand. *Observed HP measured on internal dyno test in optimal conditions for 2-stroke engines. REV Gen4 PLATFORM: Key to the Summit’s agility is the extreme mass centralization of the 4th generation REV platform. The trademark pyramidal frame, die-cast aluminum front suspension module and heat exchanger design ensure it’s strong, yet lightweight. PDRIVE CLUTCH: A major factor in the quickness of REV sleds is the pDrive clutch. Fast and friction-free dual rollers transfer torque in place of traditional sliding buttons on this 100% clutch. The oversize rollers with needle bearings, wide flyweights and shaft-on-shaft design emphasize smooth operation and long life. Ultra-responsive shifting, impressive RPM consistency and 2.8 lb./ 1.3 kg lighter than the TRA VII. COOL AIR FLOW: Side panel venting improves airflow to drive components for cooler operations and optimal performance. TMOTION REAR SUSPENSION: The tMotion flexes laterally, reducing the effort to initiate a roll, due to a ball joint at the center hinge between the rear arm and drop link and split flat-tube front arms. Very progressive motion ratio makes the ride on trails even more comfortable. POWDERMAX LIGHT TRACK WITH FLEXEDGE: 3.5 in. (9 cm) pitch reduces weight, and keeps snow between lugs for added performance. Exclusive 16-in (41-cm) wide design adds flotation and traction without sacrificing manoeuvrability. Edges flex to reduce the effort to initiate roll-up. Available in either 2.5 or 3.0 in (6.3 or 7.63 cm) lug heights.

ROTAX 850 E-TEC ENGINE: The most powerful 2-stroke engine in the industry.* It pumps out 10 more horsepower (165 hp) than its predecessor, but its responsiveness is what really shines. With the pDrive primary clutch, it’s 30% quicker responding than the 800R E-TEC giving you the instant acceleration you demand. *Observed HP measured on internal dyno test in optimal conditions for 2-stroke engines. REV Gen4 PLATFORM: Key to the Summit’s agility is the extreme mass centralization of the 4th generation REV platform. The trademark pyramidal frame, die-cast aluminum front suspension module and heat exchanger design ensure it’s strong, yet lightweight. PDRIVE CLUTCH: A major factor in the quickness of REV sleds is the pDrive clutch. Fast and friction-free dual rollers transfer torque in place of traditional sliding buttons on this 100% clutch. The oversize rollers with needle bearings, wide flyweights and shaft-on-shaft design emphasize smooth operation and long life. Ultra-responsive shifting, impressive RPM consistency and 2.8 lb./ 1.3 kg lighter than the TRA VII. COOL AIR FLOW: Side panel venting improves airflow to drive components for cooler operations and optimal performance. TMOTION REAR SUSPENSION: The tMotion flexes laterally, reducing the effort to initiate a roll, due to a ball joint at the center hinge between the rear arm and drop link and split flat-tube front arms. Very progressive motion ratio makes the ride on trails even more comfortable. POWDERMAX LIGHT TRACK WITH FLEXEDGE: 3.5 in. (9 cm) pitch reduces weight, and keeps snow between lugs for added performance. Exclusive 16-in (41-cm) wide design adds flotation and traction without sacrificing manoeuvrability. Edges flex to reduce the effort to initiate roll-up. Available in either 2.5 or 3.0 in (6.3 or 7.63 cm) lug heights.

ROTAX 850 E-TEC ENGINE: The most powerful 2-stroke engine in the industry.* It pumps out 10 more horsepower (165 hp) than its predecessor, but its responsiveness is what really shines. With the pDrive primary clutch, it’s 30% quicker responding than the 800R E-TEC giving you the instant acceleration you demand. *Observed HP measured on internal dyno test in optimal conditions for 2-stroke engines. E-TEC SHOT STARTER: Push-button starting with almost no added weight. After an initial pull-start, the engine charges an ultracapacitor. Pushing the handlebar SHOT button for subsequent starts uses energy stored in the ultracapacitor to turn the magneto into an electric motor that rotates the flywheel, and with E-TEC technology, starts the engine. Eliminates nearly 20 lb. (9 kg) compared to conventional electric start. SHOT starting is only possible with Ski-Doo-exclusive E-TEC technology. REV Gen4 PLATFORM: Key to the Summit’s agility is the extreme mass centralization of the 4th generation REV platform. The trademark pyramidal frame, die-cast aluminum front suspension module and heat exchanger design ensure it’s strong, yet lightweight. PDRIVE CLUTCH: A major factor in the quickness of REV sleds is the pDrive clutch. Fast and friction-free dual rollers transfer torque in place of traditional sliding buttons on this 100% clutch. The oversize rollers with needle bearings, wide flyweights and shaft-on-shaft design emphasize smooth operation and long life. Ultra-responsive shifting, impressive RPM consistency and 2.8 lb./ 1.3 kg lighter than the TRA VII. COOL AIR FLOW: Side panel venting improves airflow to drive components for cooler operations and optimal performance. TMOTION REAR SUSPENSION: The tMotion flexes laterally, reducing the effort to initiate a roll, due to a ball joint at the center hinge between the rear arm and drop link and split flat-tube front arms. Very progressive motion ratio makes the ride on trails even more comfortable.

ROTAX 850 E-TEC ENGINE: The most powerful 2-stroke engine in the industry.* It pumps out 10 more horsepower (165 hp) than its predecessor, but its responsiveness is what really shines. With the pDrive primary clutch, it’s 30% quicker responding than the 800R E-TEC giving you the instant acceleration you demand. *Observed HP measured on internal dyno test in optimal conditions for 2-stroke engines. E-TEC SHOT STARTER: Push-button starting with almost no added weight. After an initial pull-start, the engine charges an ultracapacitor. Pushing the handlebar SHOT button for subsequent starts uses energy stored in the ultracapacitor to turn the magneto into an electric motor that rotates the flywheel, and with E-TEC technology, starts the engine. Eliminates nearly 20 lb. (9 kg) compared to conventional electric start. SHOT starting is only possible with Ski-Doo-exclusive E-TEC technology. REV Gen4 PLATFORM: Key to the Summit’s agility is the extreme mass centralization of the 4th generation REV platform. The trademark pyramidal frame, die-cast aluminum front suspension module and heat exchanger design ensure it’s strong, yet lightweight. PDRIVE CLUTCH: A major factor in the quickness of REV sleds is the pDrive clutch. Fast and friction-free dual rollers transfer torque in place of traditional sliding buttons on this 100% clutch. The oversize rollers with needle bearings, wide flyweights and shaft-on-shaft design emphasize smooth operation and long life. Ultra-responsive shifting, impressive RPM consistency and 2.8 lb./ 1.3 kg lighter than the TRA VII. COOL AIR FLOW: Side panel venting improves airflow to drive components for cooler operations and optimal performance. TMOTION REAR SUSPENSION: The tMotion flexes laterally, reducing the effort to initiate a roll, due to a ball joint at the center hinge between the rear arm and drop link and split flat-tube front arms. Very progressive motion ratio makes the ride on trails even more comfortable.

The 2020 Summit X changes the mindset of a deep snow rider with its effortless deep-snow agility, and instant power. It dares you to leave nothing on the table each and every ride - and rewards you every time you do. Package Highlights Rotax® 850 E-TEC® engine RAS™ 3 front suspension REV® Gen4 platform with narrow-design bodywork pDrive™ clutch with clickers Ergo-Step side panels Compact digital gauge Full-length extruded profile running boards with large openings tMotion™ rear suspension with ice scratchers PowderMax® Light with FlexEdge™ track choice: 16 × 154 / 165 × 2.5 in. or 16 x 154 / 165 / 175 x 3.0 in.* Brembo racing brake with braided stainless-steel brake line RER™ electronic reverse RF D.E.S.S.™ key Sea-level calibration available on all configurations Warm glove box with 4 L / 1 US gal of storage Pilot™ DS 3 skis Stiff grab handle on handlebar Engine ROTAX® Engine: 850 E-TEC® Engine details: Liquid-cooled, two-stroke, eRAVE™ Cylinders: 2 Displacement: 849 cc / 51.9 in.³ Bore: 82 mm / 3.2 in.

The 2020 Summit X changes the mindset of a deep snow rider with its effortless deep-snow agility, and instant power. It dares you to leave nothing on the table each and every ride - and rewards you every time you do. Package Highlights Rotax® 850 E-TEC® engine RAS™ 3 front suspension REV® Gen4 platform with narrow-design bodywork pDrive™ clutch with clickers Ergo-Step side panels Compact digital gauge Full-length extruded profile running boards with large openings tMotion™ rear suspension with ice scratchers PowderMax® Light with FlexEdge™ track choice: 16 × 154 / 165 × 2.5 in. or 16 x 154 / 165 / 175 x 3.0 in.* Brembo racing brake with braided stainless-steel brake line RER™ electronic reverse RF D.E.S.S.™ key Sea-level calibration available on all configurations Warm glove box with 4 L / 1 US gal of storage Pilot™ DS 3 skis Stiff grab handle on handlebar Engine ROTAX® Engine: 850 E-TEC® Engine details: Liquid-cooled, two-stroke, eRAVE™ Cylinders: 2 Displacement: 849 cc / 51.9 in.³ Bore: 82 mm / 3.2 in. Stroke: 80.4 mm / 3.2 in.

ROTAX 850 E-TEC ENGINE: The most powerful 2-stroke engine in the industry.* It pumps out 10 more horsepower (165 hp) than its predecessor, but its responsiveness is what really shines. With the pDrive primary clutch, it’s 30% quicker responding than the 800R E-TEC giving you the instant acceleration you demand. *Observed HP measured on internal dyno test in optimal conditions for 2-stroke engines. REV Gen4 PLATFORM: Key to the Summit’s agility is the extreme mass centralization of the 4th generation REV platform. The trademark pyramidal frame, die-cast aluminum front suspension module and heat exchanger design ensure it’s strong, yet lightweight. PDRIVE CLUTCH: A major factor in the quickness of REV sleds is the pDrive clutch. Fast and friction-free dual rollers transfer torque in place of traditional sliding buttons on this 100% clutch. The oversize rollers with needle bearings, wide flyweights and shaft-on-shaft design emphasize smooth operation and long life. Ultra-responsive shifting, impressive RPM consistency and 2.8 lb./ 1.3 kg lighter than the TRA VII. COOL AIR FLOW: Side panel venting improves airflow to drive components for cooler operations and optimal performance. TMOTION REAR SUSPENSION: The tMotion flexes laterally, reducing the effort to initiate a roll, due to a ball joint at the center hinge between the rear arm and drop link and split flat-tube front arms. Very progressive motion ratio makes the ride on trails even more comfortable.

ROTAX 850 E-TEC ENGINE: The most powerful 2-stroke engine in the industry.* It pumps out 10 more horsepower (165 hp) than its predecessor, but its responsiveness is what really shines. With the pDrive primary clutch, it’s 30% quicker responding than the 800R E-TEC giving you the instant acceleration you demand. *Observed HP measured on internal dyno test in optimal conditions for 2-stroke engines. E-TEC SHOT STARTER: Push-button starting with almost no added weight. After an initial pull-start, the engine charges an ultracapacitor. Pushing the handlebar SHOT button for subsequent starts uses energy stored in the ultracapacitor to turn the magneto into an electric motor that rotates the flywheel, and with E-TEC technology, starts the engine. Eliminates nearly 20 lb. (9 kg) compared to conventional electric start. SHOT starting is only possible with Ski-Doo-exclusive E-TEC technology. REV Gen4 PLATFORM: Key to the Summit’s agility is the extreme mass centralization of the 4th generation REV platform. The trademark pyramidal frame, die-cast aluminum front suspension module and heat exchanger design ensure it’s strong, yet lightweight. PDRIVE CLUTCH: A major factor in the quickness of REV sleds is the pDrive clutch. Fast and friction-free dual rollers transfer torque in place of traditional sliding buttons on this 100% clutch. The oversize rollers with needle bearings, wide flyweights and shaft-on-shaft design emphasize smooth operation and long life. Ultra-responsive shifting, impressive RPM consistency and 2.8 lb./ 1.3 kg lighter than the TRA VII.

ROTAX 850 E-TEC ENGINE: The most powerful 2-stroke engine in the industry.* It pumps out 10 more horsepower (165 hp) than its predecessor, but its responsiveness is what really shines. With the pDrive primary clutch, it’s 30% quicker responding than the 800R E-TEC giving you the instant acceleration you demand. *Observed HP measured on internal dyno test in optimal conditions for 2-stroke engines. REV Gen4 PLATFORM: Key to the Summit’s agility is the extreme mass centralization of the 4th generation REV platform. The trademark pyramidal frame, die-cast aluminum front suspension module and heat exchanger design ensure it’s strong, yet lightweight. PDRIVE CLUTCH: A major factor in the quickness of REV sleds is the pDrive clutch. Fast and friction-free dual rollers transfer torque in place of traditional sliding buttons on this 100% clutch. The oversize rollers with needle bearings, wide flyweights and shaft-on-shaft design emphasize smooth operation and long life. Ultra-responsive shifting, impressive RPM consistency and 2.8 lb./ 1.3 kg lighter than the TRA VII. COOL AIR FLOW: Side panel venting improves airflow to drive components for cooler operations and optimal performance. POWDERMAX LIGHT TRACK WITH FLEXEDGE: 3.5 in. (9 cm) pitch reduces weight, and keeps snow between lugs for added performance. Exclusive 16-in (41-cm) wide design adds flotation and traction without sacrificing manoeuvrability. Edges flex to reduce the effort to initiate roll-up. Available in either 2.5 or 3.0 in (6.3 or 7.63 cm) lug heights.

ROTAX 850 E-TEC ENGINE: The most powerful 2-stroke engine in the industry.* It pumps out 10 more horsepower (165 hp) than its predecessor, but its responsiveness is what really shines. With the pDrive primary clutch, it’s 30% quicker responding than the 800R E-TEC giving you the instant acceleration you demand. *Observed HP measured on internal dyno test in optimal conditions for 2-stroke engines. REV Gen4 PLATFORM: Key to the Summit’s agility is the extreme mass centralization of the 4th generation REV platform. The trademark pyramidal frame, die-cast aluminum front suspension module and heat exchanger design ensure it’s strong, yet lightweight. PDRIVE CLUTCH: A major factor in the quickness of REV sleds is the pDrive clutch. Fast and friction-free dual rollers transfer torque in place of traditional sliding buttons on this 100% clutch. The oversize rollers with needle bearings, wide flyweights and shaft-on-shaft design emphasize smooth operation and long life. Ultra-responsive shifting, impressive RPM consistency and 2.8 lb./ 1.3 kg lighter than the TRA VII. COOL AIR FLOW: Side panel venting improves airflow to drive components for cooler operations and optimal performance. TMOTION REAR SUSPENSION: The tMotion flexes laterally, reducing the effort to initiate a roll, due to a ball joint at the center hinge between the rear arm and drop link and split flat-tube front arms. Very progressive motion ratio makes the ride on trails even more comfortable. POWDERMAX LIGHT TRACK WITH FLEXEDGE: 3.5 in. (9 cm) pitch reduces weight, and keeps snow between lugs for added performance. Exclusive 16-in (41-cm) wide design adds flotation and traction without sacrificing manoeuvrability. Edges flex to reduce the effort to initiate roll-up. Available in either 2.5 or 3.0 in (6.3 or 7.63 cm) lug heights.

The 2020 Summit X changes the mindset of a deep snow rider with its effortless deep-snow agility, and instant power. It dares you to leave nothing on the table each and every ride - and rewards you every time you do. Package Highlights Rotax® 850 E-TEC® engine RAS™ 3 front suspension REV® Gen4 platform with narrow-design bodywork pDrive™ clutch with clickers Ergo-Step side panels Compact digital gauge Full-length extruded profile running boards with large openings tMotion™ rear suspension with ice scratchers PowderMax® Light with FlexEdge™ track choice: 16 × 154 / 165 × 2.5 in. or 16 x 154 / 165 / 175 x 3.0 in.* Brembo racing brake with braided stainless-steel brake line RER™ electronic reverse RF D.E.S.S.™ key Sea-level calibration available on all configurations Warm glove box with 4 L / 1 US gal of storage Pilot™ DS 3 skis Stiff grab handle on handlebar Engine ROTAX® Engine: 850 E-TEC® Engine details: Liquid-cooled, two-stroke, eRAVE™ Cylinders: 2 Displacement: 849 cc / 51.9 in.³ Bore: 82 mm / 3.2 in.

Built with input from Ski-Doo Backcountry Experts and other real-world riders. The unique Expert package features let you go where the snow is deeper, the lines are more technical and the adventure is wilder. Package Highlights Specialized package with dedicated configuration and features developed with our Backcountry Experts to conquest the most technical terrains Short tunnel with lightweight snow fender Rotax® 850 E-TEC® engine RAS™ 3 front suspension with lighweight ski spindle and revised ski stopper to reduce ski drag and improve predictability in technical sidehills REV® Gen4 platform with narrow-design bodywork pDrive™ clutch with clickers Ergo-Step side panels Compact digital gauge Full-length extruded profile running boards with large openings tMotion™ rear suspension with ice scratchers and adjustable limiter strap Shock package with stiffer calibration: Kashima coated HPG Plus front shocks with lightweight springs, HPG Plus center shock with lightweight springs and KYB® Pro 36 rear shock aluminum piggyback with Easy-Adjust compression adjuster (22 clicks) PowderMax® Light with FlexEdge™ track choice: 16 × 154 / 165 × 3.0 in.* Brembo racing brake with braided stainless-steel brake line RF D.E.S.S.™ key Sea-level calibration available on all configurations Pilot™ DS 3 skis Low handlebar strap Two ULTIMATE color choices with panel wrap: Supreme look and finish, maximum protection Flexible handguards Short riser block (120 mm / 4.7 in.) Smaller diameter handlebar and handgrips Compact and lightweight FORTY7C seat

The 2020 Summit X changes the mindset of a deep snow rider with its effortless deep-snow agility, and instant power. It dares you to leave nothing on the table each and every ride - and rewards you every time you do. Package Highlights Rotax® 850 E-TEC® engine RAS™ 3 front suspension REV® Gen4 platform with narrow-design bodywork pDrive™ clutch with clickers Ergo-Step side panels Compact digital gauge Full-length extruded profile running boards with large openings tMotion™ rear suspension with ice scratchers PowderMax® Light with FlexEdge™ track choice: 16 × 154 / 165 × 2.5 in. or 16 x 154 / 165 / 175 x 3.0 in.* Brembo racing brake with braided stainless-steel brake line RER™ electronic reverse RF D.E.S.S.™ key Sea-level calibration available on all configurations Warm glove box with 4 L / 1 US gal of storage Pilot™ DS 3 skis Stiff grab handle on handlebar

ROTAX 850 E-TEC ENGINE: The most powerful 2-stroke engine in the industry.* It pumps out 10 more horsepower (165 hp) than its predecessor, but its responsiveness is what really shines. With the pDrive primary clutch, it’s 30% quicker responding than the 800R E-TEC giving you the instant acceleration you demand. *Observed HP measured on internal dyno test in optimal conditions for 2-stroke engines. E-TEC SHOT STARTER: Push-button starting with almost no added weight. After an initial pull-start, the engine charges an ultracapacitor. Pushing the handlebar SHOT button for subsequent starts uses energy stored in the ultracapacitor to turn the magneto into an electric motor that rotates the flywheel, and with E-TEC technology, starts the engine. Eliminates nearly 20 lb. (9 kg) compared to conventional electric start. SHOT starting is only possible with Ski-Doo-exclusive E-TEC technology. REV Gen4 PLATFORM: Key to the Summit’s agility is the extreme mass centralization of the 4th generation REV platform. The trademark pyramidal frame, die-cast aluminum front suspension module and heat exchanger design ensure it’s strong, yet lightweight. PDRIVE CLUTCH: A major factor in the quickness of REV sleds is the pDrive clutch. Fast and friction-free dual rollers transfer torque in place of traditional sliding buttons on this 100% clutch. The oversize rollers with needle bearings, wide flyweights and shaft-on-shaft design emphasize smooth operation and long life. Ultra-responsive shifting, impressive RPM consistency and 2.8 lb./ 1.3 kg lighter than the TRA VII. COOL AIR FLOW: Side panel venting improves airflow to drive components for cooler operations and optimal performance. TMOTION REAR SUSPENSION: The tMotion flexes laterally, reducing the effort to initiate a roll, due to a ball joint at the center hinge between the rear arm and drop link and split flat-tube front arms. Very progressive motion ratio makes the ride on trails even more comfortable.

DESIGNED BY RIDERS, FOR RIDERSBuilt with input from Ski-Doo Backcountry Experts and other real-world riders. The unique Expert package features let you go where the snow is deeper, the lines are more technical and the adventure is wilder.

ROTAX 850 E-TEC ENGINE: The most powerful 2-stroke engine in the industry.* It pumps out 10 more horsepower (165 hp) than its predecessor, but its responsiveness is what really shines. With the pDrive primary clutch, it’s 30% quicker responding than the 800R E-TEC giving you the instant acceleration you demand. *Observed HP measured on internal dyno test in optimal conditions for 2-stroke engines. REV Gen4 PLATFORM: Key to the Summit’s agility is the extreme mass centralization of the 4th generation REV platform. The trademark pyramidal frame, die-cast aluminum front suspension module and heat exchanger design ensure it’s strong, yet lightweight. PDRIVE CLUTCH: A major factor in the quickness of REV sleds is the pDrive clutch. Fast and friction-free dual rollers transfer torque in place of traditional sliding buttons on this 100% clutch. The oversize rollers with needle bearings, wide flyweights and shaft-on-shaft design emphasize smooth operation and long life. Ultra-responsive shifting, impressive RPM consistency and 2.8 lb./ 1.3 kg lighter than the TRA VII. COOL AIR FLOW: Side panel venting improves airflow to drive components for cooler operations and optimal performance. TMOTION REAR SUSPENSION: The tMotion flexes laterally, reducing the effort to initiate a roll, due to a ball joint at the center hinge between the rear arm and drop link and split flat-tube front arms. Very progressive motion ratio makes the ride on trails even more comfortable.

Built with input from Ski-Doo Backcountry Experts and other real-world riders. The unique Expert package features let you go where the snow is deeper, the lines are more technical and the adventure is wilder. Package Highlights Specialized package with dedicated configuration and features developed with our Backcountry Experts to conquest the most technical terrains Short tunnel with lightweight snow fender Rotax® 850 E-TEC® engine RAS™ 3 front suspension with lighweight ski spindle and revised ski stopper to reduce ski drag and improve predictability in technical sidehills REV® Gen4 platform with narrow-design bodywork pDrive™ clutch with clickers Ergo-Step side panels Compact digital gauge Full-length extruded profile running boards with large openings tMotion™ rear suspension with ice scratchers and adjustable limiter strap Shock package with stiffer calibration: Kashima coated HPG Plus front shocks with lightweight springs, HPG Plus center shock with lightweight springs and KYB® Pro 36 rear shock aluminum piggyback with Easy-Adjust compression adjuster (22 clicks) PowderMax® Light with FlexEdge™ track choice: 16 × 154 / 165 × 3.0 in.* Brembo racing brake with braided stainless-steel brake line RF D.E.S.S.™ key Sea-level calibration available on all configurations Pilot™ DS 3 skis Low handlebar strap Two ULTIMATE color choices with panel wrap: Supreme look and finish, maximum protection Flexible handguards Short riser block (120 mm / 4.7 in.) Smaller diameter handlebar and handgrips Compact and lightweight FORTY7C seat Engine

The 2020 Summit X changes the mindset of a deep snow rider with its effortless deep-snow agility, and instant power. It dares you to leave nothing on the table each and every ride - and rewards you every time you do. Package Highlights Rotax® 850 E-TEC® engine RAS™ 3 front suspension REV® Gen4 platform with narrow-design bodywork pDrive™ clutch with clickers Ergo-Step side panels Compact digital gauge Full-length extruded profile running boards with large openings tMotion™ rear suspension with ice scratchers PowderMax® Light with FlexEdge™ track choice: 16 × 154 / 165 × 2.5 in. or 16 x 154 / 165 / 175 x 3.0 in.* Brembo racing brake with braided stainless-steel brake line RER™ electronic reverse RF D.E.S.S.™ key Sea-level calibration available on all configurations Warm glove box with 4 L / 1 US gal of storage Pilot™ DS 3 skis Stiff grab handle on handlebar ULTIMATE Iceberg Blue color with panel wrap: Supreme look and finish, maximum protection Engine ROTAX® Engine: 850 E-TEC® Engine details: Liquid-cooled, two-stroke, eRAVE™ Cylinders: 2 Displacement: 849 cc / 51.9 in.³

Built with input from Ski-Doo Backcountry Experts and other real-world riders. The unique Expert package features let you go where the snow is deeper, the lines are more technical and the adventure is wilder. Package Highlights Specialized package with dedicated configuration and features developed with our Backcountry Experts to conquest the most technical terrains Short tunnel with lightweight snow fender Rotax® 850 E-TEC® engine RAS™ 3 front suspension with lighweight ski spindle and revised ski stopper to reduce ski drag and improve predictability in technical sidehills REV® Gen4 platform with narrow-design bodywork pDrive™ clutch with clickers Ergo-Step side panels Compact digital gauge Full-length extruded profile running boards with large openings tMotion™ rear suspension with ice scratchers and adjustable limiter strap Shock package with stiffer calibration: Kashima coated HPG Plus front shocks with lightweight springs, HPG Plus center shock with lightweight springs and KYB® Pro 36 rear shock aluminum piggyback with Easy-Adjust compression adjuster (22 clicks) PowderMax® Light with FlexEdge™ track choice: 16 × 154 / 165 × 3.0 in.* Brembo racing brake with braided stainless-steel brake line RF D.E.S.S.™ key Sea-level calibration available on all configurations Pilot™ DS 3 skis Low handlebar strap Two ULTIMATE color choices with panel wrap: Supreme look and finish, maximum protection Flexible handguards Short riser block (120 mm / 4.7 in.) Smaller diameter handlebar and handgrips Compact and lightweight FORTY7C seat

ROTAX 850 E-TEC ENGINE: The most powerful 2-stroke engine in the industry.* It pumps out 10 more horsepower (165 hp) than its predecessor, but its responsiveness is what really shines. With the pDrive primary clutch, it’s 30% quicker responding than the 800R E-TEC giving you the instant acceleration you demand. *Observed HP measured on internal dyno test in optimal conditions for 2-stroke engines. E-TEC SHOT STARTER: Push-button starting with almost no added weight. After an initial pull-start, the engine charges an ultracapacitor. Pushing the handlebar SHOT button for subsequent starts uses energy stored in the ultracapacitor to turn the magneto into an electric motor that rotates the flywheel, and with E-TEC technology, starts the engine. Eliminates nearly 20 lb. (9 kg) compared to conventional electric start. SHOT starting is only possible with Ski-Doo-exclusive E-TEC technology. REV Gen4 PLATFORM: Key to the Summit’s agility is the extreme mass centralization of the 4th generation REV platform. The trademark pyramidal frame, die-cast aluminum front suspension module and heat exchanger design ensure it’s strong, yet lightweight. PDRIVE CLUTCH: A major factor in the quickness of REV sleds is the pDrive clutch. Fast and friction-free dual rollers transfer torque in place of traditional sliding buttons on this 100% clutch. The oversize rollers with needle bearings, wide flyweights and shaft-on-shaft design emphasize smooth operation and long life. Ultra-responsive shifting, impressive RPM consistency and 2.8 lb./ 1.3 kg lighter than the TRA VII.

The 2020 Summit X changes the mindset of a deep snow rider with its effortless deep-snow agility, and instant power. It dares you to leave nothing on the table each and every ride - and rewards you every time you do. Package Highlights Rotax® 850 E-TEC® engine RAS™ 3 front suspension REV® Gen4 platform with narrow-design bodywork pDrive™ clutch with clickers Ergo-Step side panels Compact digital gauge Full-length extruded profile running boards with large openings tMotion™ rear suspension with ice scratchers PowderMax® Light with FlexEdge™ track choice: 16 × 154 / 165 × 2.5 in. or 16 x 154 / 165 / 175 x 3.0 in.* Brembo racing brake with braided stainless-steel brake line RER™ electronic reverse RF D.E.S.S.™ key Sea-level calibration available on all configurations Warm glove box with 4 L / 1 US gal of storage Pilot™ DS 3 skis Stiff grab handle on handlebar Engine ROTAX® Engine: 850 E-TEC® Engine details: Liquid-cooled, two-stroke, eRAVE™ Cylinders: 2

ROTAX 850 E-TEC ENGINE: The most powerful 2-stroke engine in the industry.* It pumps out 10 more horsepower (165 hp) than its predecessor, but its responsiveness is what really shines. With the pDrive primary clutch, it’s 30% quicker responding than the 800R E-TEC giving you the instant acceleration you demand. *Observed HP measured on internal dyno test in optimal conditions for 2-stroke engines. REV Gen4 PLATFORM: Key to the Summit’s agility is the extreme mass centralization of the 4th generation REV platform. The trademark pyramidal frame, die-cast aluminum front suspension module and heat exchanger design ensure it’s strong, yet lightweight. PDRIVE CLUTCH: A major factor in the quickness of REV sleds is the pDrive clutch. Fast and friction-free dual rollers transfer torque in place of traditional sliding buttons on this 100% clutch. The oversize rollers with needle bearings, wide flyweights and shaft-on-shaft design emphasize smooth operation and long life. Ultra-responsive shifting, impressive RPM consistency and 2.8 lb./ 1.3 kg lighter than the TRA VII. COOL AIR FLOW: Side panel venting improves airflow to drive components for cooler operations and optimal performance. TMOTION REAR SUSPENSION: The tMotion flexes laterally, reducing the effort to initiate a roll, due to a ball joint at the center hinge between the rear arm and drop link and split flat-tube front arms. Very progressive motion ratio makes the ride on trails even more comfortable. POWDERMAX LIGHT TRACK WITH FLEXEDGE: 3.5 in. (9 cm) pitch reduces weight, and keeps snow between lugs for added performance. Exclusive 16-in (41-cm) wide design adds flotation and traction without sacrificing manoeuvrability. Edges flex to reduce the effort to initiate roll-up. Available in either 2.5 or 3.0 in (6.3 or 7.63 cm) lug heights.